John
Designed to meet the demanding data rate and powerrequirements of IP cameras with high-quality streaming videocapabilities when a PoE-compliant Ethernet switch is not available, this compact PoE injector features simple data and power connections. By sending 48V, Ethernet terminals such as wireless LAN access point, IP phone, and web IP camera are powered remotely.
This PoE injector generates safe power over category 5 Enhanced (UTP CAT5e or higher) cabling. It is especially design for outdoor networking facility (however, this is device must be installed indoors) and low port density installations.
The IEEE 802.3af and IEEE 802.3af standard for Power over Ethernet (PoE) enables both electrical power and data to be transmitted over a single twisted-pair cable .
Shared cabling reduces installation costs, decreases the space required for wires, and affords freedom of placement by eliminating wiring to a power source.
Connects to AC power with a standard IEC plug. Installs inline with standard CAT5e Ethernet cables. No need any other software or protocal conversion. It is recommended that the UTP CAT5e cable length not exceed 328 feet (100-meters).
Universal AC input voltage ranges from 90 to 264 VAC with input frequency from 50 to 57 Hz, and major safety approvals including RoHS, CE, and FCC make the injector usable around the world.
Case size is just 4.7 in (120 mm) x 2.4 in (62mm)x 1.5 in (39mm). Provides total output power of 16 W or 40W. Indicator LEDs display ON and fault states of Power and PoE status for easy troubleshooting.
It has been equipped with two-stage lightning-proof core with overload and short circuit protection, and also prevents from electrostatic induction. The power supply can be centrally located where it can be attached to an un-interruptible power supply.
NE-PSE101 PoE Adapter / Injector
| |
---|---|
CONTROL | |
Ethernet Protocol | IEEE 802.3 i 10 BASE-T; IEEE 802.3 u 100 BASE-TX; IEEE 802.3 x Flow Control; IEEE 802.3 af Power over Ethernet |
Transmission Distance | 328FT (100M) |
Transmission Speed | 10 / 100M Self-Adaptive |
ELECTRICAL | |
Input Voltage | 90 to 264 VAC |
PoE Voltage Output | 36V-57V DC |
AC Input Frequency | 50-57 HZ |
Max Output Power | 16W(IEEE 802.3af) or 40W(IEEE 802.3at) |
PHYSICAL | |
---|---|
Port | One for AC Input, One for RJ45 Input, One for PoE Output (RJ45) |
Interface Protection | Fulfill IEC61000-4-2(ESD)±15KV(air),±8KV (contact) Sustain 8/20us 24A(12A) |
Supported Cables | Catagory 5 Enhanced Unshield Twisted Pair (CAT5e UTP) |
LED Indicator | One for Power, One for PoE Work Status |
Dimension ( H*W*D) | 4.7 x 2.4 x 1.5 in (120 x 62 x 39 mm) |
Weight | 0.44lbs (0.2kg) |
Temperature Ranges | 32° – 131° F (0° – 55° C) Operating -4° – 158° F (-20° – 70° C) Storage |
Max Humidity Gradient | Working Humidity 90%, Non-Condensing Storage Humidity 95%, Non-Condensing |
CERTIFICATION | |
---|---|
Certification | RoHS, FCC, CE |
Environment | Indoor Rated |